Adobe Photoshop Get more done with Photoshop

A fun idea to do is create an abstract picture, you can do anything you want to it. One fun idea is the add a fire look to a picture, here is a step by step way to do it: First thing's first, get a nice stock photo. I used a stock photo of an eye from deviantART.First of all I opened the photo and resized it to 75% of it's original size. 1. After you've opened your photo up, duplicate the background layer then apply Filter > Distort > Twirl and use the default setting. That should have just distorted it slightly. Now change the layer mode for your duplicated layer to Lighten. That will have made the eye look a little bit alien-like. 2. Now brighten up the picture a little bit by adding in a Brightness/Contrast adjustment layer (Layer > New Adjustment Layer > Brightness/Contrast...) Now this is the part where you choose the fiery color for your photo. Go to Layer > New Adjustment Layer > Gradient Map. I changed the layer mode for this layer to Linear Light and lowered the opacity to 85%. 3.Ok, here are some nice optional effects.Before adding effects like these, you'll probably need to flatten your image (Layer > Flatten Image) then duplicate the one remaininglayer. First, I applied Filter > Artistic > Rough Pastels with the default settings. Now change the layer mode for this layer to Lighten and maybe lower the opacity if you see it need sit. I lowered the opacity to 70%. 4. To finish this tutorial off, I flattened all the layers, applied Filter > Sharpen > Sharpen, faded the sharpen to about 40% (Edit > Fade) then I added in a little bit of tech and grunge.

Photoshop CS2 is able to create an Automated Task. When you have a whole bunch of repeated tedious task to do on a whole sets of photos. Eg: resize a whole stack of photos to a specific resolution. It is easy enough to do: First, open up the desired photos with Photoshop or simply just drag and drop the photos onto the Photoshop main stage. This is the photo which I will be using. It is actually a 20001333 resolution photo and now the view is actually 25% of the actual size. Now is to open up the Action Window. Go to Window > Action or simply press the shortcut key Alt + F9. The Action window will looks like what it is in the above image. We have everything ready and now is to do the trick. Click on the "Create New Action" button as where is shown on the above image A New Action window will come out, the Name of course is the name of your this Automated Task, here as I am doing photo resizing so I will give it the name "Resize". Everything just remain as it is and click on Record Just for your information, the Function Key is actually for you to set the shortcut key to this Automated Task. Anyway, I will not set anything here. Now the Record button has turned active (red color), and from now on whatever action you do will be recorded. I will start doing the resizing now. Go to the Image > Image Size or with the shortcut key Ctrl+Atl+I. Here I will resize to the above figures. Click Ok. The image has now been resized. What I need to do has actually finish. In actual tedious task of course it won't be that short but here it will be enough as an example. Click on the Stop Recording button as where is shown on the image. Now you have your Automated Task set! .To show on how it works. Simply open another photo or drag other photo onto the Photoshop main stage. In the above image I am now using another image. Now on the Action window, select on the "Resize"(or the name you gave for this Automated Task), then click on the "Play Selection" button as where is shown on the image.

Digital art is a fun thing to experiment with, you have all probably sometime seen picture that is entirely made of text. Here's how to do it... 1. Go to "Image -> Adjustments -> Threshold", and move the slider left or right, untill you get satisfying picture... 2. Open the notepad, and type the words you want ito it like this: 3. Next, copy that text, and paste it in new text layer you have created. After that, set up style and size of font, and rotate text untill you are satisfied. 4. Next, right click on text layer, and click "Resterise Layer". Select the template layer and with the magic wand at a tolerance of 32 select the white area. Go to select>similar to select all of the light areas and then select the text layer from the layers palette. Next select text layer, and hit delete to clear the excess text and drag the template layer into the bin icon. Back the image up in white by making a new layer (Go to "Layer -> New Fill Layer -> Solid Color") with a white fill and dragging it underneath the text layer.

In Digital art you can easilar create a "mac" style background. You can use these in all sorts of situations, including the obvious - your desktop as well as part of your designs or for corporate work (powerpoint presentations, flash work etc) in photoshop. BACKGROUND LAYER We begin with a blank canvas and then draw a subtle gradient across it. (I'm using a 1280x1024 canvas here) Don't be fooled by the black border incidentally, that's just photoshop. So anyhow I've chosen two orange colours that are very similar to each other to make a very subtle gradient indeed. Add a NEW LAYER Now take your Polygonal Lassoo Tool (shortcut key L) and draw in a rough triangular selection as shown. Then take a really fat soft brush (size 300 or so) and draw some faded in white with the edge of it, again as shown. Be careful not to make it too strong however. Set your white from step 2 to 'OVERLAY'. NEW LAYER Now again take your Polygonal Lassoo Tool and do a similar trinagle but back and against it (like shown). This time add some black. I actually used a gradient fill here using Black and nothing. You can get this type of gradient by selecting your gradient tool then dropping down and choosing the second one along: Set your black layer to Overlay & 34%. NEW LAYER Now use the Pen Tool and draw a nice looking curve. The secret to nice curves with the pen tool is dragging the handle a long way. Join the path back up so its one continuous blob, then right click and select "Make Selection" You should now have a selection of a nice curve (as shown). Once again use the gradient tool this time with White fading to nothing and add some white. Set this layer to Overlay and you should have something similar to whats shown. NEW LAYER And again grab the Pen Tool and this time make a new even more interesting shape. You can see the shape I created on the left Close the shape back in on itself so its one continuous path and again right click and choose "Make Selection" Now with your selection, grab that fat soft brush again (size 300) and add some Black just at the top on one side (as shown). Don't let go of your selection as we'll need it for the next few steps NEW LAYER Now choose a selection tool (doesn't matter which one) and hit the Down arrow key 10 times. You need to have a selection tool on or else you can move your selection around and instead Photoshop will try to move some of your artwork (since you are on a new layer it will give you an error) so make sure you've chosen a Polygonal Lassoo tool or one of the others. Now press CTRL-SHIFT-I to inverse your selection. Then with your soft brush (size 300) paint some black down the bottom as shown. When you're done set the layer to 'Overlay' and fade it back to 60% NEW LAYER Now press CTRL-SHIFT-I to inverse your selection again (back to the original) and this time paint some nice white as shown. Note that because we've moved our selection down back in Step 8, this won't quite align with the black. NEW LAYER Now grab your gradient tool, choose white to nothing and set it to 'Radial Gradient'. Then add a white light up the top left as shown. Set this layer to 'OVERLAY' Now at the moment the colours aren't looking quite right, if I was really energetic I'd go back to the beginning and start again with a different set of oranges, but instead we're going to do a quick adjustment NEW LAYER On the new layer add a fill of a good orange similar to as shown. Set the blending mode to "Colour" and opacity to 55%. This should adjust nicely. NEW LAYER Now once again use the usual method of using the pen tool to draw a nice curved selection (as shown) and then right click and choose "Make Selection Use the White - Nothing gradient and add a smooth white transition from left to right as shown. And set the layer to 'Overlay'. NEW LAYER As you can see we're getting close. Now create one final curved selection down in the bottom left add a white gradient fading to nothing (our favourite tool as you can see) and switch to 'Overlay'. For the final touches I added a tinge of black overlayed bottom right and a bit more white overlayed on the top left. But these are inconsequential changes. You might want to go through and polish yours up a little too at this point because other than that you're done!

The photo retouching technique liquifying, can take a while especiall if it is a image. It doesn't help your computer isn't powerful. I've found a great way to improve the operations. If we will work not with the whole image but with the part of it the processing can be done more quickly. 1. Select the area for further retouching but rectangle tool: 2. Copy the area: ctrl+c 3. Create a new document and paste the area but the compinations of hotkeys: ctrl+n, ctrl+v 4. Open 'Liquify' filter menu: 5. Make the changes. Click 'Ok' 6. Select corrected area: ctrl+a 7. Copy corrected area: ctrl+c 8. Go back to the original document 9. Paste the corrected area into original document (you may wish to place it on a new layer):

A fun thing to do with patterns is to create rain. Learning how to add rain to any image is quite easy. Start by opening the image you would like to add the effect of rain to. Then create a new layer and fill it with white colour. Now go to Filter-> Noise -> Add noise. Then apply motion blur with the angle you would like to have your rain falling and change the blending option to screen. Now press ctrl + M and change the curve from the middle acc. to the intensity of the rain.

Learn how to create a mac clock. Now we will have to create the shiny look. Please add noise both to your glare and your base as it will look more official compared to the Dashboard Clock. Now we have to create the clock it self so take out your Eliptical Tool and draw in a circle on top of your glare layer and fill it in with black. Now add the border around the black circle with the hex indicated below. Now we have to create the glare so if you want to get more detailed view, you can just follow my way. Place the original clock design near yours and draw a white circle inside the black circle about 1 or 2 pixels apart. After that grab your eraser tool and set the opacity to 75% and slowlu brush from the top until you get something like mine. I also added a small tiny border around the glare just to make it look a little nicer. Now we have to add all the digits inside. I personally liked how Arial Narrow looked on it so i added that font although i think Mac's designer used some other font that i am not familiar with or maybe just missed. Create a white circle in the center of the digits. Following that draw another red circle inside the white's circle center. Now by the alignment of the arrows on the clock, use your white circle as the base and grab your pen tool to draw out one of the arrows. Just by connecting to one side of the base of the circle and extending towards the numbered digit and then following back to the opposite base of the circle, you can easily acheive those fancy arrows. Repeat the steps again to create the short arrow as well. Now place the long arrow layer underneath the white and red circle layer. Following by going to the Settings of the circle and adding a drapshadow of about 75% opacity with the color filling of black. After you have done that, grab your line tool and set th weight to 2px and draw a line from the red circle to the selected digit on the seconds. Now your basically done, just grab your text tool and add the State and the AM/PM indicator on top. If your cruious about the colors, you can just take the hex of the original design. Your final result should look like this:

Article Source: http://www.articles.ask-me-about.com

Did you like the article? Want to find out more about learning photoshop now and get a free report